Introduce:
Dump Truck D20
|
Model D20 |
|
N.V.W. 16000kg |
|
Payload 20000kg |
|
G.V.W. 36000kg |
|
Overall dimensions (L*W*H) 7365*2909*3145mm |
|
Wheelbase 3600mm |
|
Track Front: 2383mm Rear: 2070mm |
|
Top speed 38km/h |
|
Max. grade ability >29% |
|
Min. turning diameter <18m |
|
Engine Model Cummins NT855-C250 |
|
Max. Power 187kw/2100r/min |
|
Max. Torque 1019Nm/1500r/min |
|
Clutch 14'' Double-plate dry clutch |
|
Transmission Fuller 8JS 118C |
|
Gears |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
rev |
|
Ratio |
8.03 |
5.32 |
3.36 |
2.54 |
2.39 |
1.58 |
1 |
8 |
|
Drive axle With wheel hubs reductions Total ratio: 13.78:1 |
|
Steering Model: GX110C Working pressure: 14Mpa |
|
Brakes Double circuits, pneumatic control brakes system working pressure: (750 50)Kpa |
|
Body hoist Tipping time: <20sec. Falling time: <20sec. |
|
Body capacity Struck: 10.7m3 Heaped (ASE2:1): 13.9m3 |
|
Tyres 14.00-24 |
|
Electrical system Voltage 24V |
Engine
Model: Cummins NT855-C250
Bore and stroke: 140*152mm
Displacement: 14L
Max. Power: 187kw/2100r/min
Max. Torque: 1019N.m/1500r/min
Clutch
14'' Double-plate dry clutch
Transmission
7 forward and 1 reverse. Fuller manual transmission.
Front axle
Heavy-duty seamless steel tube welded
Toe-in: (0-3)mm
Drive axle
Double reduction, full-floating axle shaft. Cast-steel axle housing.
Central reduction ratio: 4.14:1
Epicyclic reduction ratio: 3.33:1
Total ratio: 13.78:1
Steering
Hydraulic assisted power steering
Brakes
2 independent circuits, pneumatic control brake system internal expanding drum brake.
Double pneumatic disengaged spring applied, parking brake.
Suspension
Semi-elliptic leaf springs with rubber bumper.
Front suspension has individual absorbers.
Body Hoist
Twin three stage single acting cylinders mounted on the outer chassis frame.
Max. Working pressure: 8.5Mpa
Frame
Fabricated from high tensile steel. C-section channel with L-section reinforced members at the center.
Cabin
Ergonomically designed, all steel construction, left hand drive cabin with adjustable seat that is fully thermal and noise insulated. Instrumental panel with gauges, warning and indicator lamps. All controls and levers are located for ease of operation. Automotive safety glass all round for maximum operator protection.
Dump body
Rock-type, high-tensile steel plate-welded body with exhaust heating.
Side plate and under floor ribs are manufactured from high yield point steel.
Types
Standard of tyres: 14.00-24
Rim size: 10.00*24
Pressure: (650 50) Kpa
Electric system
Single cable, negative ground, voltage rating 24V. |
